Untitled

Model Solution

ERROR 10 Supplies Memory Error

ERROR10.32 Non HP Supply Installed

ERROR 11 Paper Out (MP/PC/UC/LC/EC/LE LOAD)

ERROR 12 Open or No EP Cartridge

ERROR 13 Paper Jam

ERROR 14 No EP Cartridge or No Toner Cartridge

ERROR 16 Toner Low Message

ERROR 18 MIO Not Ready

ERROR 20 Memory Overflow

ERROR 21 Print Overrun

ERROR 22 I/O Config Error/Par I/O Error/ MIO Error

ERROR 23 I /O Not Ready

ERROR 24 Job Memory Full

ERROR 30 PS Error 16 PS Error 16

ERROR 30 PS Error 22 or 25 Error 30 PS Error 22 or 25

ERROR 30 PS Error XX Error 30 PS Error XX

ERROR 40 Data Transfer Error

ERROR 41 Temporary Print Engine Failure

41.1 Paper feed timing issue, doublefeeding problem, wrong paper size

ERROR 43 Error Communication problem between the formatter PCA and an optional interface installed

ERROR 49.XX Printer Error Firmware error or printjob corrupt. Update firmware or cancel job.

ERROR 50 Service Fuser error

ERROR 51 Service Laser error

ERROR 52 Service Scanner Motor error

ERROR 53 Service Memory Ram error

ERROR 54 Duplex Feed Error (IID/IIID) or Main Motor Stall 2686 A/D

Error 55 Internal Communication Problem

ERROR 56 IID/IIID Output Selector Knob not in Duplex Position

Error 56 IIISi/4Si Trying to print envelope in duplex mode

ERROR 57 Incompatible Memory Card or Gears Seized or bad main motor or fan motor

Error 58 Click on link to see detailed information

ERROR 59 Add Memory IIISi/4Si Click on link to see detailed information

ERROR 60 2686 A/D, 4, 4+, 4P Defective Formatter PCA, IIISi/4Si/4V: DefectiveSIMMS

ERROR 61 Defective formatter PCA

ERROR 61 MEMORY IIISi/4Si/4V - Defective memory SIMMs, reseat, remove or replace

ERROR 62 MEMORY IIISi/4Si/4V - Defective memory SIMMs, reseat, remove, replace

ERROR 62.X SERVICE Error 63 Defective Formatter PCA or defective SIMMS - reseat SIMMS or remove temporarily (IIISi/4Si/4V)

ERROR 66.12.22 66.12.22 error on LaserJet 4240/4250/4350 when printing multiple copy duplex and staple jobs. A mismatch between the stapler and the print engine speed is responsible and can be cured by upgrading the firmware to V20070401 or later.

ERROR 67 Defective formatter PCA

ERROR 79 Software Drivers, Memory PCA's, Font Macro Cartridges, I/O Cards, Def. Toner Cartridge (4+ only)

ERROR 80 Bad jet direct or EIO Hardrive

ERROR 89 Postscript Simm bad

ERROR X.YYYY Formatter error